Monday, March 3, 2014
Raiding the Woodshed
I am currently away from home and visiting my parents in France for the festive period. So while away from my workshop and tools I certainly didnt expect to be making blog posts.
Lately, I have been reading a lot of stuff by Peter Folansbee. Peter uses predominately Oak which is not sawn but rived by splitting and it inspired me to go and have a rummage through my parents woodshed.
Walnut - which I think was felled early 2011
Oak of around 1.5ft diameter which was felled late last year 2010
While there are a few Oak & Walnut pieces, unfortunately, everything has been cut to firewood size lengths, but ... with some determination I might be able to get some stock for small boxes.
The Walnut looks like it would be amazing once dried, planed and finished!
Time to start playing - what tools have my parents got I can use?
Attacking a likely piece of Walnut - first some mark up.
Using a wedge to scribe all the lines before splitting anything. First lightly, then again to a depth of about 1/4 inch.
First split I am using an old axe head as its wider than the wedges. Its also as dull as dishwater!
Look at that grain! Once I trim the pith and sapwood Im sure there will be something usable...
Ok they are small but Im determined to use them for something
I wish I had a scrub or fore plane handy...
Next culprit - the mighty Oak. Marked out for eighths.
Again I deeply scribed all the lines before splitting.
Hmn ... not what I was expecting.
All splits completed. It helps to not separate each slice after its been split. This keeps the whole thing together and more stable until all the splitting is done. The hatchet is then used to cut the final fibres and release the slices.
Straight grained Oak - I wish these pieces were three times as long! I could easily get 2"x2" lengths for a joined stool
The haul - An hour or twos work with a hammer and wedges. I further re-split each eighth of Oak into sixteenths.
If I had a froe Im sure this Oak piece would split cleanly again into 32nds.
All in all its been a fun afternoon and I have actually learned something useful. I was surprised how accurately the wood can be split if scribed first. In most cases I split the line and couldnt have been more accurate with a saw. I will see how this stock dries out and see if it inspires me to build something. If not - mum has already been eyeing it up for the fire. Its such a shame that the trees were cut down and logged before I started this wood working journey.
There are still a couple of Walnut and Oak trees on the property which my parents are thinking about removing - rest assured it will be me with the chainsaw claiming first dibs! This fun little exercise has given me the confidence that I could produce usable stock from a complete tree trunk with very basic tools. Imagine breaking reliance on the Timber yard! - From tree to furniture, now thats a satisfying journey!
Merry Christmas everyone!...
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment